ICAO aeronautical chart of France for drone pilots
The 1:500,000 ICAO aeronautical chart by IGN and the SIA shows airspace, aerodromes and obstacles as aircraft pilots see them. Read it first, then tick “Drone restrictions” or “UAS zones” in the “Layers” panel to see where recreational flying is prohibited or height-limited; click an area to see its limit.
What is this map for?
The ICAO chart is the navigation chart used by pilots flying under visual flight rules (VFR). For a drone pilot, it helps understand the airspace around a spot: nearby aerodromes, control zones (CTR), prohibited, restricted and danger areas (P, R and D), the very low-level military training network, obstacles. It does not show drone-specific rules, which is why the DGAC drone restrictions and UAS zones can be shown on top of it, along with Drone-Spot spots.
Reading the chart
- Altitudes in feet: airspace limits are given in feet (ft), above mean sea level (AMSL) or above the surface (ASFC), or as flight levels (FL). For reference, 120 m, the maximum height in the open category, is about 400 ft above the ground;
- “SFC” floor: the airspace starts at ground level, so a drone is affected even at low height;
- Drone restrictions (tick to show): areas where recreational flying is prohibited or height-limited;
- UAS zones (tick to show): UAS geographical zones published by the SIA, with their conditions and the office to contact.
Good to know
The ICAO chart is not updated every aeronautical cycle (28 days), so it may not show the latest changes. It covers mainland France and is displayed from the overview down to city scale; closer in, the image is simply enlarged: switch to the map or satellite background to find a precise place. Temporary areas (SUP AIP) and NOTAMs are not shown: check them before every flight.
To read the chart's symbols and colours, see the ICAO-VFR chart legend in the library (26 March 2020 edition, in French: a few symbols may have changed since).