3D relief map
3D relief to check the terrain before a flight: slopes, ridges, valleys. The relief is indicative and does not replace checking the zones. Use two fingers (or right-click with a mouse) to tilt and rotate the map; the “2D” button puts the map flat again.
What is the 3D relief for?
Seeing the terrain in perspective helps to plan a flight: find a clear take-off point, a ridge that blocks the view, a valley where gusts funnel, or the height difference between you and your subject. Drone-Spot spots, the Géoportail drone restrictions and, if you tick them, the UAS zones stay visible and clickable in 3D.
Using the map
- Tilt and rotate: two fingers on a touch screen, or right-click (or Ctrl + drag) with a mouse; the “2D” / “3D” button switches between the flat and the tilted view.
- “3D relief” layer: untick it in the “Layers” panel to remove the relief and the shading and put the map flat again.
Accuracy of the relief
Altitudes come from a worldwide digital elevation model of varying accuracy (a few tens of metres): thin ridges, cliffs, buildings and vegetation are not in it. Never use it to estimate a flying height or the distance to an obstacle: check the zones and the authorised flight height before every flight.
Elevation sources
Elevation: Terrain Tiles from Amazon Web Services (Mapzen project), queried online. Credits, from the terms of use: produced using Copernicus data and information funded by the European Union (EU-DEM layers); U.S. Geological Survey 3DEP, GMTED2010 and SRTM data, courtesy of the USGS; ETOPO1 from the U.S. NOAA; and, outside France, the national datasets listed on the project's attribution page. Base map: © OpenStreetMap, OpenFreeMap.