Skip to content

Drone classes: C0, C1, C2, C3, C4

Published on 21 October 2026

A recent drone carries a class marking (C0 to C4) applied by the manufacturer. It says what the drone can do and in which subcategory it may be used. Only the manufacturer can give it: a drone does not become "C1" just because it is light.

ClassMassRequired equipmentSubcategory
C0under 250 gBasic safety featuresA1
C1under 900 gDirect remote identification and geo-awarenessA1
C2under 4 kgRemote identification, geo-awareness, low-speed mode (except fixed wing)A2 and A3
C3under 25 kg, wingspan under 3 mRemote identification and geo-awarenessA3
C4under 25 kg, no automatic controlDesigned for ready-to-fly model aircraftA3

Two functions to know

  • Direct remote identification: the drone continuously broadcasts a signal with its identifier and position, which the authorities can receive.
  • Geo-awareness: the drone detects that it is about to cross an airspace limit and warns the pilot.

What about my older drone?

A drone bought before 1 January 2024 with no class marking can still fly: in A1 if it weighs under 250 g, in A3 if it weighs under 25 kg (with the online exam). Every drone placed on the market since 2024 must carry a class to fly in the open category.

Source: DSAC guide "Open category", edition 2, version 1.1. For information only.

Connection to the site lost. Trying again…

The site is not responding. Trying again in seconds.

The site is no longer responding.

The site has been updated. Reloading the page…

This page has expired.

Resuming failed. Please reload the page.

The site is no longer responding.