ND filters: what are they for on a drone?
Do your drone videos look jerky, or are your images too bright in strong sunshine? ND filters are often the answer. Small, light and inexpensive, they are among the accessories that make the biggest difference to image quality. Here is what they are for and how to choose them.
What is an ND filter?
ND stands for "neutral density". An ND filter is a grey-tinted glass that fits in front of the drone camera's lens. It reduces the amount of light coming in, without changing the colours: a bit like sunglasses for your camera.
Why use one?
On most hobby drones, the lens aperture is fixed or barely adjustable. On a bright day, to avoid an image that is too bright, the camera has only one option: shorten the exposure time drastically, sometimes to a thousandth of a second. The result in video: every frame is perfectly frozen, and motion looks choppy and unnatural, especially on trees, water or cars.
The ND filter takes away part of the light. The camera can then use a longer exposure time, which leaves a slight motion blur on each frame: your videos become smooth, like in the cinema.
The 180° rule
Filmmakers use a simple rule: the exposure time should be roughly one over twice the number of frames per second.
- at 25 frames per second: about 1/50 of a second;
- at 30 frames per second: about 1/60 of a second;
- at 50 frames per second: about 1/100 of a second;
- at 60 frames per second: about 1/120 of a second.
To follow this rule in daylight, you almost always need an ND filter. Set your camera to manual mode, set the sensitivity to the lowest value (usually ISO 100), choose the exposure time with this rule, then pick the filter that gives a correctly exposed image.
Reading the numbers: ND4, ND8, ND16…
The number tells you how much the light is divided by: an ND8 lets in 8 times less light, an ND16 16 times less. As a guide:
- ND4 or ND8: overcast weather, morning and evening;
- ND16: sunny weather, the most used filter;
- ND32 or ND64: bright summer sun, snow, beaches or sea that reflect a lot of light.
These are only guidelines: look at the image and the exposure indicator in your flight app, and change filters if needed. Manufacturers often sell sets of several filters made for each drone model.
What about polarising filters?
Some sets include "ND/PL" filters, which combine neutral density and polarisation. The polariser reduces reflections on water and windows, and deepens the sky. Be careful: its effect depends on the angle to the sun, so it can change when the drone turns during a shot.
Do you need a filter for photos?
For a standard photo, not really: a very short exposure time does not harm a still image, quite the opposite. ND filters are mainly for video, or for special photo effects, such as a longer exposure that smooths the water of a river, to be done only when the drone is hovering steadily in light wind.
A few practical tips
- Choose filters made for your model: they are designed for its weight and do not disturb the gimbal that stabilises the camera.
- Fit and remove the filter with the drone switched off, or as the manual says, handling the camera gently.
- Keep filters clean and stored in their case: a fingerprint shows up immediately on the image.
- At the golden hour or in dull weather, a light ND or no filter at all is often enough.
With a set of ND filters in your bag, your videos will gain in smoothness and softness. All that is left is to choose a nice spot on Drone-Spot, check the zones and the weather, and take off.